Fiberglass Chopped Core Mat

Fiberglass Chopped Core Mat

分享
  • 产品详情
  • 产品参数


Fiberglass Chopped Core Mat

Chopped core mat is made of fiberglass chopped strands stitched by polyester yarn together with PP, PET or Nylon core materials like sandwich design. It is compatible with Polyester, Vinyl and Epoxy resin and widely used in boat building, wind energy, automotive, train parts, flat panels etc, suitable for RTM, vacuum infusion, hand lay up forming processes.

                                 

General Data:

规格型号

Code

质量

Weight (g/m2)

短切层/短切层

Chopped layer

(g/m2)

夹芯层PP

Core layer

(g/m2)

含水率%

Moisture  content

浸透速度

Wet speed

(≤S)

EMNM300/180/300

780

300/300

180

≤0.2

≤60

EMNM450/180/450

1080

450/450

180

≤0.2

≤60

EMNM600/180/600

1380

600/600

180

≤0.2

≤60

EMNM750/180/750

1680

750/750

180

≤0.2

≤60

EMNM300/250/300

850

300/300

250

≤0.2

≤60

EMNM450/250/450

1150

450/450

250

≤0.2

≤60

EMNM600/250/600

1450

600/600

250

≤0.2

≤60

EMNM750/250/750

1750

750/750

250

≤0.2

≤60


Roll width: Standard width in 1250mm, 1270mm, and other sizes depends on customer’s real needs, available in 200mm to 3200mm.

Packing: Fiberglass chopped core mat is usually rolled in a paper tube with inner diameter 76mm. The roll is warped with plastic film, then put into carton. Lay the rolls horizontally, and can be loaded on pallets and bulk in container.

Storage: The product should be stored in a cool, water-proof area. It is recommended that the room temperature and humidity be always maintained at 15℃ to 35℃ and 35% to 65% respectively. Please keep the product in its original packaging before being used, avoiding moisture absorption.